890 reviews analysed
1. Attic Stairs Insulation Cover for Pull Down Stair 25" x 54" x 11"- R-Value 15.3 Extra Thick Fire Proof Attic Cover Stairway Insulator with Easy Installation, Low-dip Entrance and Tear by Miloo
- ATTIC COVER with EXTRA THICKNESS: The highest quality wall thickness in the market will protect your house from air leaks during the summer and winter months and reduce your bills drastically
- DIMENSIONS FOR: 25″ x 54″ x 11″ attic hatch opening. This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden in the attic.
- ATTIC INSULATION EASY ZIPPER: Allows easy entrance and exit to the attic when climbing up and down your pull down attic stairs.
- DIPPING ENTRANCE: Our custom insulator was created with a shallow entrance point that will allow your climb up and down to be safe and easy.
- At Miloo we are committed to producing quality products that we know you will love. If for any reason you are not completely satisfied, contact us so that we can be of assistance.
Have your utility bills been going through the roof?
Protect yourself with an effective heat management solution by easily installing our Attic Stair Cover Insulation
- DOUBLE AIR-BUBBLE INNER LINING: Gives a thickness of 6mm of heat reflecting material to bounce off the heat radiating from either side (Winter or Summer months).
- EXTREME R-VALUE INSULATION: Delay conductive heat movement by resisting heat flow to transfer through your attic opening by using our multi-layer insulation.
- REFLECTIVE FILM OUTER LAYERING: The durable aluminum layers create a water, humidity and moisture-resistant barrier allowing you to breathe and live more comfortably in extreme outer weather conditions.
- FEEL THE DIFFERENCE IMMEDIATELY: Experiencing hot or cold air rushing through the attic opening? After installing the insulation properly that will stop instantaneously
Easy to handle and install with a staple gun (staple gun not included)
Sewn seams for added strength and longevity
Easy to use zipper for quick access to and from the attic
2. fowong Weather Stripping for Door and Window, 3/8 Inch Wide X 1/4 Inch Thick Silicone Rubber Door Seal Gap Blocker Window Insulation Strip (Brown)
- MATERIAL-This weather strip is made from silicone rubber which are environmentally friendly. Silicone rubber can retain its flexibility even under extreme temperature and keep working well.
- STRONG ADHESIVE & GOOD SEALING- Stick firmly and no-degumming. Good sealing effect for door and window insulation.
- APPLICATION-This silicone rubber seal strip is widely used in various types of doors, windows and other items like cabinet, cupboard, refrigerator, air conditioner, car, etc.
- DIMENSION-This adhesive door seal is 3/8 Inch Wide X 1/4 Inch Thick X 19 Feet Long , suitable for gaps from 5/32 inch to 1/4 inch (4mm to 6mm).
- SERVICE&WARRANTY-If you are not satisfied with our product, please contact us for free replacement or full refund.
3. QEP 72000 Natural Cork Underlayment 1/4 inch Roll
- Reduces sound transmission from both the surface of a floor as well as through the floor to living spaces below
- Use under ceramic tile, stone, marble, engineered hardwood and laminate floors
- Acts as a crack isolation membrane that resists transfer of stress cracks from subfloor through to flooring surfaces
- Reduces thermal transmission, increasing the effectiveness of floor heating systems
- Easy to install in both glue-down and loose-lay configurations.Coverage: 200 sq ft / roll
Cork Underlayment reduces sound and thermal transmission and helps protect the floor against the transfer of stress cracks from the subfloor.
From the Manufacturer
Cork Underlayment reduces sound and thermal transmission and helps protect the floor against the transfer of stress cracks from the subfloor
4. BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
3 x 24V 50W Ceramic Cartridge Heater
5. CHPOWER Ender 3 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5
- Compatibility: This upgraded gray MK8 style metal extruder is an original upgraded replacement part for CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, Ender 3, Ender 3 Pro, Ender 5.
- Compatible with PLA/ ABS/ Wood/ TPU/ PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- Work Better : It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Easy to install: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Ender 3 Pro / Ender 3/ CR-10 Extruder Upgraded Aluminum Metal MK8 Bowden Extruder, 40 Teeth Drive Gear 1.75mm Filament for Ender 3 Pro, Ender 5, CR-10 Series.
* upport Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S, S4, S5
* Works better than original plastic stock extruder, make loading filament much easier.
* Compatible with PLA/ ABS/ Wood/ TPU/ PTEG
* 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
* Easy to Install.
* Material: Aluminum Alloy
* Color: Gray
* Drive Gear: 40 Teeth
– Package List:
1x Gray MK8 extruder
6. uxcell 236mil/6mm 15sqft Car Auto Hood Floor Tailgate Fender Heat Sound Deadener Underlay Underfelt Liner Mat Pad 55"x40"
- Uxcell Liner has the same characteristics and excellent noise insulator properties as rubber foam. It absolutely doesn’t absorb water & has no odor unlike polyurethane foam. It has a very low weight, oil and petrol resistant.
- The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
- Placement of using sound deadener mat:A.Hood B.Celling C.Door D.Cockpit Floor E.Tailgate F.Firwall and U Type Wall J.Front Fender H.Front and Back Wheels
- 1.Waterproof and moistureproof 2.Superb backed self adhesive 3.Easy to install/handle/cut flexible
- Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more
7. Sovol 3D Printer Tent Warm Enclosure Constant Temperature Soundproof Dustproof Heating Box for Ender 3 Ender 3 pro Ender 5 Ender 5 Pro 3D Printer
- Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!
- Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low– temperature weather, improve printing stability
- Dustproof and good noise reduction
- The interior uses Pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread
- table Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space
Sovol 3D Printer Tent， Warm Enclosure Constant temperature Soundproof Dustproof Heating Box for Ender 3 Ender 3 pro 3D Printer （18”x22”x27”）
3D Printer Enclosure: Safe, Quick and Easy Installation
Constant temperature / Soundproof / Dustproof
Applicable: Ender3/Ender 3 pro/Ender 5/Ender 5 Pro
Storage Size: 445X565x685 mm
Land Size: 495x615x735 mm
Iron pipes Diameter: 16 mm
440 Iron pipes x 4
560 Iron pipes x 4
645 Iron pipes x 4
ixed-angle bracket x 8
folding shed x 1
8. CHPOWER CR-10 Hotend Assembly, MK8 Extruder Original Replacement, 3D Printers Parts/Accessories for Creality 3D Printer CR-10 CR-10S CR-10S4 CR-10S5
- CR-10 extruder aluminum: 100% original and high quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5
- CR-10 extruder replacement – Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- Creality CR-10 Upgraded MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 12V 40W
- CR10 extruder upgrade- Easy Install: The part aligned perfectly out of the box, can make your printer up and running in 5 minutes, it will works like a new printer.
- The wiring will fit for all of CR-10S series 3D printer, long enough for S4, S5 model. This is a perfect replacement to the CR-10 extruder. It heats well, comes with the extra 0.4 nozzles for bonus.
– 100% creality upgrade and high quality material, fine workmanship and good performance.
– 3D printer accessories: Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
– MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.
– Suits for the filament with diameter 1.75mm, 0.4mm output diameter nozzle.
– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1 x CR-10 0.4mm Nozzle
2 x CR-10 Cooling Fans
1x Fan cover
1x Aviation connector
1x Nozzle kit-4PCS 0.4mm(BONUS)
1.Please put TMC2130 drivers in the correct direction on the board when installing.
2.Due to light and screen difference, the color may be slightly different from the pictures.
3.Please allow 1-5mm deviation due to manual measurement.
9. Silicone Insulation pad Pot Mat Trivet Pad Heat Resistant Anti-Slip for Table Oven Mitts (6 pack)
- 1. Supremely Versatile: Use it as a trivet, hot pad, hot mat,Coaster protector,pot holder,place mat,jar opener, spoon rest,drying mat or anywhere you need extra grip or exteme heat or cold protection.
- 2.FOOD-GRADE SILICONE&PERFECT SIZE – Made from 100% BPA free food grade silicone, non-slip,flexible enough to comfortably grab a hot dish or pan, size 7×7 Inch, Thickness 6mm. (thicker and weightier than others)
- 3.Withstands extreme temperatures from -20 to +480 degrees Fahrenheit, perfect for use in a microwave, or freezer. As a protector for countertop, table, stove,oven or others.
- 4.Easy to clean, Tail hook design, you can hang it to dry it, easy to store.
- 5.100% Satisfaction Guarantee: Our products comes with 100% guarantee, if for any reason you are not satisfied with the purchase we offer full refund or replacement.
Why you need HoShip Pot Holder set?
Heat Resistant Kitchen mat can keep p your hand safe with handing hot pans, dishes and pots from the oven or stove.
Can be used as pot holder,trivet, mats,hot pads,jar opener, table coaster , spoon rest and etc.
Protect stove top, table top pr counter top from unsightly burns.
Heat resistant from -40℉ to 450℉,superior heat protection.
Non-sticky and non-slipper.
Easy to clean and store.Round hole design, easy to hang and save space.
They are really perfect for all your cooking/baking need.
10. Phone Wallet – Adhesive Card Holder – Cell Phone Pouch – Stick on Lycra Pocket by Gecko – Carry Credit Cards and Cash (Weed)
- PHONE WALLET SETS BY GECKO come with a stick on wallet Gecko Phone Wallet, Phone Stand Holder, 1 RFID Card sleeve, Earphone Untangler, and a Microfiber Screen Cleaner. Gecko offers customer service response in under 24hrs because we stand behind our Gecko Phone Wallets for a full 90 days.
- PHONE CARD HOLDER sets are universal, they can fit to almost any phone or case, Gecko wallet case sets are good for anyone with a cell phone. Gecko Phone Pockets are made to hold 2-3 cards and a bit of cash. A slim, sleek card case that makes a minimalist happy.
- SECURE AND PRIVATE Card holder for back of phones and card case sets made by Gecko include a built in safety strap so you never worry about losing your valuable items. Phone Wallets are Extra Tall so your credit cards and cash never show. Dimensions are Height – 3.7in (96mm) / Width 2.3in (60mm) / Thickness – 0.07 in (2mm)
- WALLET CASES are travel accessories for back of cell phones, our durable LYCRA material (not silicone) can stretch and hold anything like a snug pocket. In a hurry? Save time with quick access to your credit cards and cash.
- CELL PHONE CARD HOLDER, adhesive credit card holder, cell phone pockets for credit cards, wallet sleeve, stick-on card holder, card case, phone cards, many names, we just call it a GECKO!
By our suggestions above, we hope that you can found Heating Insulation Boards 6Mm for you.Please don’t forget to share your experience by comment in this post. Thank you!