Top 9 Bed Plate Heating

0
534 reviews analysed

1. SIMAX 3D-Printer Heated-Bed Platform,Heating-Plate 24V/12V Changeable 235x235x3mm Aluminum Hot Bed for Ender3,CR10, Updated Version of MK2B & MK2A,Black

SIMAX 3D-Printer Heated-Bed Platform,Heating-Plate 24V/12V Changeable 235x235x3mm Aluminum Hot Bed for Ender3,CR10, Updated Version of MK2B & MK2A,Black

Feature

Description

Specifications:
Material: aluminum
Color: black
Model: MK3
Thermistor length: 1m
Cable length: 1M / 3.3in
Support voltage: 240w 24V DC
DC24V: 130℃, 411W
Resistance: 1.3ohm
Heating Area: 235 x 235mm
Item weight: 900g / 2.0lb
Package weight: About 1000g / 2.2lb

Heating bed cable description:
1. Project type: hotbed line for 3d printer
2. Applies to: All CR-10 3D printers.

Notice
CR-10 3D printer heater supports 24V power supply
Due to the different measurement methods, the size will be a bit error, the error is about 1mm, the actual measurement shall prevail.
24V wiring method: Weld Number 2 for positive, Number 3 for negative, 1 is empty

Package List:
1 * Aluminum Heatbed
1* 1m Cable

2. High Temperature Ender-3s Flexible 235x235mm Silicone Heater 120V Heated Bed Build Plate Adhesive Backing + Sensor for Creality Ender-3 Ender 5 Ender 3 Pro 3D Printer (120V 500W)

High Temperature Ender-3s Flexible 235x235mm Silicone Heater 120V Heated Bed Build Plate Adhesive Backing + Sensor for Creality Ender-3 Ender 5 Ender 3 Pro 3D Printer (120V 500W)

Feature

Description

Style:120V 500W

Package: 1piece

Backing:3M adhesive backing

Size: 235mmx235mm

It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters

Much safer and more reliable heat source than RepRap PCB heatbeds.

With 1.2meter NTC 100K 3950 thermistor for temperature Control (choose number 1 or 11 in the marlin firmware for the bed temperature sensor).

Power consumption: 500W for 120v and 220v, 300w for 24V .

Attached with two pieces 1.2meter length power wire

3. CHPOWER Creality CR-10 Bed Surface, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover, 310x310mm

CHPOWER Creality CR-10 Bed Surface, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover, 310x310mm

Feature

Description

Instructions:

The product is divided into two parts: the form of A+B

– Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B plays an attractive role)

– Part B: The top is magnetic (with the adsorption under the A part), the back is the 3M adhesive (posted on the printer platform, which plays a fixed role)

Description:

Easy removal Magnetic CR-10/CR-10S 3D printing platform for PLA filament material. To use this cr-10 bed surface, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.

Feature:

1. Introducing the first ever removable, magnetically secured, cr-10 build plate for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
2. Flexible 3D Printing CR10 Build Plate: reusable, provides a durable and stable build surface whilst preventing model warping.

Kindly note:

1. This CR-10S Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping.

2. This cr-10 build mat 300 x 300 is not for use with high-temperature printing applications above 70°C.

4. 3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender-3 /Ender 3X /Ender 3 Pro 3D Printers DIY Kit

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender-3 /Ender 3X /Ender 3 Pro 3D Printers DIY Kit

Feature

Description

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, we are diligent to Do Our Best!

Note: These are original replacement parts for Creality 3D Printer Ender 3 / Ender 3 Pro / Ender 3X

Specifications of Heater Bed:
Model: dc24v 220w Aluminum hotbed for 3D Printer Ender 3
Product process: Aluminum Substrate
Hot Bed Size: 235x235x3mm
Voltage: 24V
Power: 220W
2) Specifications of Printing Build Surface:
Creality 3D Printers replacement Parts Printing Build Surface for Ender 3
Size: 235mm x 235mm
Color: Black
Background is made of 3M adhesive, easily stick on the heater bed platform.

Features:
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling
clean removal of the printed part afterward
Compatible with ABS, PLA, HIPS and the other filament
Single sheet design installs more quickly and with fewer bubbles than tape or films
Durable construction allows for multiple uses with either the same or different filament material

HOW TO USE THE BUILD SURFACE:
There are 2 methods to attaching the build surface on heater bed:
1. clamp the build surface to the print bed using binder clips(at least 3 clips)
2. Torn off 3M tape on back and stick it on heater bed.

Package List
1 × Aluminum DC24V 220W Heater Bed 235x235x3mm With Cable Which be installed well
1X 3D Printing Printer Build Surface.

5. 3D Printer Silicone Heated Pad, Heating Plate 310x310mmx1.5mm, 120V 750W for Creality CR-10 /CR-10S 3D Printers Heater Bed with Screw Holes /3M Adhesive

3D Printer Silicone Heated Pad, Heating Plate 310x310mmx1.5mm, 120V 750W for Creality CR-10 /CR-10S 3D Printers Heater Bed with Screw Holes /3M Adhesive

Feature

6. USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)

USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)

Feature

Description

Style:120V

This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.

Backing:3M adhesive backing

Size: 400mmx400mm

It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters

Much safer and more reliable heat source than RepRap PCB heatbeds.

With 1.2meter NTC 100K 3950 thermistor for temperature Control.

Power consumption: 1000W.

Attached with two pieces 1.2meter length power wire

7. Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235MM

Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235MM

Feature

Description

Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints.

8. SIMAX3D 3D Printer Aluminum Heated Bed, 24V 220W 310x310mm Heating Plate Platform, Updated Version of MK2A MK2B – Hot Bed for Ender 3, CR10, Black,with 1m Cable

SIMAX3D 3D Printer Aluminum Heated Bed, 24V 220W 310x310mm Heating Plate Platform, Updated Version of MK2A MK2B - Hot Bed for Ender 3, CR10, Black,with 1m Cable

Feature

Description

Advantanges :
Never warp& Never rust.
Easy to get the first layer even for a new user
Flexible, Removable, stick to magnets very well
Suits variety of filaments, especially for PLA and ABS
Free clean- just flex the plate a little then take the prints off after cooled
Fast heater performance, less waiting time after printing.
A lifetime 3D printer bed

Material:
100% real Ultem1000( PEI)amber color, matte surface.-0.125mm thickness – Made in Europe
This spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.5mm or 0.4mm thickness
PEI is 3m tape pre-applied, free bubbles.

How to use?
After apply the PEI sheet on our special spring stainless steel sheet,
You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.
Easily remove 3D prints on printer by removing the spring steel plate, flexing it,
and popping the print off. It’s simple and makes the print removal process much easier.

Packing List
1 * Aluminum Heat bed

1 *1M Cable

9. Hot Bed Platform,Heating-Plate 24V/12V Changeable 220x220x3mm Aluminum Heated Bed for 3D Printer Ender3,CR10, Updated Version of MK2B & MK2A,Black

Hot Bed Platform,Heating-Plate 24V/12V Changeable 220x220x3mm Aluminum Heated Bed for 3D Printer Ender3,CR10, Updated Version of MK2B & MK2A,Black

Feature

Description

Specifications:
Material: aluminum
Color: black
Model: MK3
Thermistor length: 1m
Cable length: 1M / 3.3in
DC24V: 130℃, 411W
Resistance: 1.2ohm
Heating Area: 220×220*3mm
Item weight: About 367.3g
Package weight: About 500g

Warming
Normally, the hot bed is a little bending becase it’s made of Aluminum,You can put one peice glass to use.
1, As the wiring harness, becuase we do not know what power you used, so we sell this item no plug, we thinkd you can free to choose the 12v/24v you need
2, No NTC thermistor, So you need to buy another one thermistor.
3, Extra holes drilled, sorry that this design,and you can ignore these holes and they won’t affect your using.
4, Maybe will there several scratches during the transit

Heating bed cable description:
1. Project type: hotbed line for 3d printer
2. Applies to: All CR-10 3D printers.

Notice
CR-10 3D printer heater supports 24V/12V power supply, you can
Due to the different measurement methods, the size will be a bit error, the error is about 1mm, the actual measurement shall prevail.
24V wiring method: Weld Port 2 for positive, port 3 for negative, 1 is Null
12V wiring method: Weld port 1 for positive,port 2、3 for negative

Package List:
1 * 220x220mm Aluminum Heatbed
1 *1M Cable

Conclusion

By our suggestions above, we hope that you can found Bed Plate Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general