Finding your suitable readers for auto pilot cooling thermostat is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for auto pilot cooling thermostat including detail information and customer reviews. Let’s find out which is your favorite one.
832 reviews analysed
1. Hydrofarm APCSC Autopilot Cooling Thermostat, White
The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint with the rotary knob. When its built-in sensor senses that the room temperature has exceeded the setpoint by at least 1°F, it will automatically activate your cooling device by powering the outlet. Digital screen displays current room temperature. Its green LED light illuminates when the outlet is activated to on. When the temperature in the room has dropped at least 1°F, the Autopilot Cooling Thermostat will cut power to the cooling device. It has a built-in 1-degree deadband and is ETL-listed. Max power handling 15A.
Easy to use analog control
Maintains desired room temperature
Controls air conditioner or exhaust fan
Temperature control range: 40 – 95°F
Digital display shows current room temperature
2. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
3. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
4. DIGITEN Wireless Temperature Controller, Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe 3 Prong Plug Heating Cooling Mode for Fan Heater Greenhouse
- 【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). It can save all settings even if the power failure.
- 【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
- 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Free to switch between ℃/℉. Maintains stable room temperature and provides comfort and energy saving.
- 【ON/OFF manual button on the receiver】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
- 【High Accuracy】: Receiver with 2m/6ft NTC highly accurate temperature probe, ambient temperature is detected automatically by thermostat outlet, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
5. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
6. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
7. Inkbird Combination Humidity Controller IHC200 + Temperature Controller ITC308, ITC306T, ITC310TB (IHC-200 + ITC-308)
- IHC-200: Switch the modes between humidification and dehumidification automatically.
- ITC-308: Dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
- ITC-306T: Heating output temperature controller(No Cooling Control) with time function specifically for breeding and planting.
- ITC-310T: Dual relay, programmable outlet thermostat, which can auto-execute to control 12 periods times with different temperatures based on its timer function.
- Frequently bought together
IHC-200 Humidity Controller
Power Input: 100 ~240VAC, 50Hz/60Hz
Power Output: Max. 10A, 100V ~240V AC
Humidity Measuring Range : 5%-99.99%RH
Humidity Control Range : 5%-99%RH
Sensor model: AM-2301
Sensor stability: <0.5%rh r="">0.5%rh>
Sensor Length：2m / 6.56ft
Relay Contact Capacity：
Humidification (12A, 100-240VAC)
Dehumidification (12A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension: Body: 140x68x33mm (5.5×2.7×1.3inch)
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
Humidity 20~85% (No Condensate)
ITC-310TB Temperature Controller
Temperature Control Range:-50~120℃ /-58~248 ℉
Temperature Resolution:0.1 ℃ / 0.1℉
Measuring Accuracy:±1℃ (-50 ~ 70℃) / ±1℉ (-58 ~ 158℉)
Temperature Control Mode:On/Off Control, Heating and Cooling
Timing Range:1~999 (min/hour/day)
Periods of Time:Max: 12 periods
Cycle Setting:1-999 times cycle, or 00 infinite cycle
Input Voltage:100 ~240VAC, 50Hz/60Hz
Voltage: 100~240V AC
Alarm:High and Low Temperature Alarm
Sensor Type:NTC Sensor(including)
Sensor Length:2m / 6.56ft
Input Power Cable Length:1.5m (5ft)
Operating Ambient Temperature:-30~ 75 ℃ / -22~ 167℉
Temperature: -20~ 60℃ / -4~ 140℉
Humidity: 20~85% (No freeze or moisture condensation)
1 x IHC-200 Humidity Controller
1 x ITC-310TB Temperature Controller
8. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
9. Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)
- PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃).
- SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature.
- INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible.
- EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD.
- SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater.
10. Stant 45358 SuperStat Thermostat – 180 Degrees Fahrenheit
By our suggestions above, we hope that you can found Auto Pilot Cooling Thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!